Before you begin
- A ready pad pack. Free Demo includes Shimmer/Soft Choir; Player six packs; Stage/Pro all 13.
- Player unlocks all pad keys. Free Demo locks C♯, D♯, F♯ and G♯.
Start and stop a pad
- Tap a key to choose the sustained pad note.
- Use the power button to start or stop Worship Pads.
Worship Pads are sustained background drones separate from playable instrument channels. Choose a pack, choose a musical key, and use the pad power/play control. Choose Major or Minor for the intended harmonic mode and listen before starting a song.
The phone shows Pads alongside the mixer; use its pack and settings controls for the compact flydown.
The key grid uses flat spellings such as Db and Gb. These are the same pitch classes as C♯ and F♯. A locked demo key does not become available by choosing its enharmonic name.
Pad control reference
- Drag Crossfade to smooth the transition between pad notes.
- Use flats to show note names with flats instead of sharps.
Balance the pad below the played instruments, and listen through a key change. Crossfade controls the transition between pad keys; a long crossfade can carry the old harmony into the next song.
- Pack / key / Major–Minor
- Chooses the sound pack and harmonic center/mode.
- Power
- Starts or stops the sustained pad.
- Volume
- Balances the pad’s contribution.
- Cutoff
- Darkens or brightens the pad.
- High Pass
- Reduces low-frequency energy to leave space for bass.
- Crossfade
- Controls the length of transitions between pad keys.
- Pad settings
- Drone Settings includes Pan, Crossfade, Use flats and Minor mode. Use flats changes the displayed spelling rather than the pitch.
Metronome control reference
- Tap Tempo to set the beat from your playing.
- Choose the time signature for the count-in.
Use the top metronome control to start/stop the click. Open the BPM/settings control to change tempo and click behavior. Choose a clear Sound and route/pan/level appropriate for rehearsal. Before a service, confirm that the audience output will not receive an unintended click.
- BPM
- Sets the click tempo; musical FX and bar-timed state fades use the tempo too.
- Time signature / beats per bar
- Sets the metrical grouping and downbeat; use the displayed signature such as 4/4.
- Tap Tempo
- Tap a steady pulse to set the tempo.
- Mute / Solo
- Silences or isolates the click in the app mix.
- Sound
- Chooses the click timbre.
- Volume / Pan
- Sets click level and position.
- Start / Stop
- Controls the live click; opening settings alone does not mean it is running.
Remember a song’s ambience and click
- Enable Change Tempo to apply a song-specific tempo.
Use song settings to store the pad’s pack/key/mode/volume and the metronome’s BPM/beats per bar. Enable automatic pad/click start only when that is intended. Recall the song and check the actual live controls, then stop both when rehearsal ends.
Expected result
What you should have now
A selected pad and click support the song with controlled volume and predictable transitions.
Common problems
- Pad key or pack is locked
- Key unlocks and pack access are separate plan capabilities.
- Old harmony lingers
- Reduce Crossfade and rehearse the key change.
- Click is heard in the wrong output
- Review click pan/level and the real mixer routing before performing.